Advanced search

Backpack Ataka-5 60L SSO(SPOSN)

Backpack Ataka-5 60L SSO(SPOSN)
This Product was added to our catalogue on Thursday, 01 October 2015.
164,00 $
  • Print product data sheet
  • Ask a question
  • Material: Avizent(polyamid/neylon) 1000D
  • Color: OD
  • Manufactured by: SSO (SPOSN)
Описание товара
Presenting your attention the RAID backpack "Attack-5". The total volume of the backpack-60 liters. "Attack-5" refers to the class of so-called RAID backpacks designed to provide its owner with autonomy for a long time, as part of the performance of official duties in isolation from the supply bases. Apart from military use, the backpack is perfect for tourists, hunters and ordinary travelers. The backpack has a rectangular design with a double entrance to the main compartment. The upper entrance has a traditional look and is, a tube with a cord and a plastic lock, a wide neck, covered with a flap on top of two polyamide locks-fastex. The closed neck is additionally fixed with a strap-tightening on the fastex lock. The bottom entrance is, in fact, unbuttoned bottom part of the backpack. When opening the nylon zipper, the bottom quarter of the main compartment of the backpack with moving away and can lean back, hanging on the back of the panel. In addition to the zipper, the lower entrance is additionally closed and fixed with two polyamide fastex. Thanks to a double entrance, provides fast access to the inside the property. In the main compartment there are, located nearby, rasstegivaemaya membrane-separator and pull cord partition, together or separately allowing you to form two separate compartments: the upper (2/3 of the volume of the main compartment) – using the above – mentioned upper and lower (1/3 volume) - respectively, with the entrance at the bottom. Inside the main compartment there, adjacent to the back panel, a large pocket (3/4 height backpack, counting from the bottom). This pocket is convenient to transport folders, cards, laptop and other flat overall items. In addition, if necessary, it can accommodate a flask-Hydrator with a capacity of up to three liters. In the latter case, the Hydrator hose, through a special hole with a valve, is displayed on any of the straps of the backpack. In the bottom of the main compartment there are two eyelets for water drainage. In two narrow long pockets-channels vertically located on the back panel in the main compartment of the backpack can be located removable aluminum "armor" (included), giving the backpack rigidity. Inside the main compartment, on the dense wall of the above-mentioned large pocket is another small flat pocket made of durable mesh fabric, covered with polyamide zipper. It is convenient for storing small equipment and documents. In the middle part of the main compartment there is an inner sling-zip closure-fastex. The fully removable top flap of the backpack, which covers the upper entrance to the main compartment, has its own volumetric pocket with a polyamide zipper. In this pocket is also detachable waterproof cover for backpack, pulled on it to protect from rain, spray or dew. On the inside of the valve there is another large flat pocket made of durable mesh fabric with polyamide zipper. The valve itself, equipped with a light belt of 50mm slings with a buckle-fastex, can be used as a separate small waist bag. On the right and left sides of the backpack there is a large vertically oriented pocket. Both pockets are closed at the top of the valves on the locks, fastex, as well as, can be stretched on the upper cut cord with a plastic lock. The volume of the side pockets is sufficient, for example, to embed in one of them plastic two-liter bottles or rolled-up Cape. In the bottom of the pockets there is a grommet for water drainage. Side pockets are sewn on the main body of the backpack in a special way: in fact, they are fixed with two powerful vertical seams on both sides, forming a through channel between themselves and the main body, allowing you to fix various long-length items on the sides of the backpack (shoulder blade, axe, machete, etc.). The volume of the main compartment and side pockets is further regulated by side slings-couplers (two on each side), which also help to fix the length gauges. On the" back " of the backpack there are three elastic panels, closed with a soft and strong ventilating mesh. The two upper ones are arranged vertically, to the right and to the left of the center of the back, allowing the air to circulate freely. Under the Central bottom panel, based on the sacrum, there is a channel with fastening elements for the developed removable belt. The right and left halves of the belt also have soft mesh panels that are in contact with the user's body. In front of the belt goes into a solid 50 mm strap with locking buckle fastex. On the back of the backpack hold two adjustable s-shaped padded shoulder straps with an inner surface of the same ventilating mesh. Straps, at the point of convergence, in the Central part of a back, have system of vertical adjustment on height, concerning the case of a backpack. The system consists of ten horizontal hinges made of 25 mm thick slings, arranged in a row in a vertical order, and a fastening Assembly attached to these hinges on strong Velcro locks, located at the point of convergence of the straps in their dorsal part. This system, with high reliability, has small dimensions and is conveniently located in a niche formed by two vertical back panels. The straps themselves are reinforced with durable polyamide slings, connecting at the bottom of the backpack with the same return slings steel self-belt buckles. From loss and slipping from the back of the user's backpack insures a strong, adjustable in volume and height, chest strap on the fastener-fastex. On the outer side of the shoulder straps there are steel half rings for fixing small equipment and additional sewn elements from the slings to fix the hose of the drinking system. Backpack allows you to carry equipment not only inside but also outside its volume, thanks to the presence on the outer free surfaces of the developed response part of the fastening standard PALS/MOLLE. All slings, fasteners forming cells, a special reinforced sewn seams in a simple geometric line with the mounting standard. Six slings with MOLLE cells (from 9 to 7 full cells) are horizontally located on the main front panel of the backpack. Three horizontal straps with cells (eight full cells) sewn onto the top flap of the backpack. Two more horizontal slings (on 10 MOLLE cells) are located in the bottom quarter of a backpack, under a horizontal lightning of the bottom entrance to the main office. The right and left soft parts of the belt, on the outside have two horizontal slings, five cells in each. At the bottom of the backpack sewn three broad (50 mm) parallel lines, forming sockets (eight sockets each) for securing additional cargo. Additional equipment is attached to MOLLE cells and bottom nests, including using the included backpack set of adjustable drawstrings. An additional element in the set is also a large Luggage pouch (260x230x90 mm) with MOLLE attachment system. This pouch is closed at the top utgiven sewn into a tube with a plastic locking mechanism on the cord and a cover flap with two locks-fastech. The right and left sides of the pouch have three rows of paired MOLLE cells. The pouch itself is ideally located, being fixed on the main front panel of the backpack, I image an additional pocket compartment. At the top and bottom of the main body of the "Atak-5" there are large comfortable handles for carrying. Two large vertical handles are located in the dorsal part of the backpack. All dogs of lightning equipped with additional leashes made of durable nylon cord.
Изображения
  • Backpack Ataka-5 60L SSO(SPOSN)
  • Backpack Ataka-5 60L SSO(SPOSN)
  • Backpack Ataka-5 60L SSO(SPOSN)
  • Backpack Ataka-5 60L SSO(SPOSN)
  • Backpack Ataka-5 60L SSO(SPOSN)
Customer reviews:
  • 5 of 5 stars! Author: Imre Németh | 28.02.2017
    It has arrived fast and in good condition. Thank you.
счетчик посещений